The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp built for attaching a phone to a camera or tripod, with quick orientation changes and accessory mounting points.
Its broad stated phone-width range makes it a practical option for creators who prefer a clamp over a magnetic attachment.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible clamp-style mount for creators who want portrait and landscape phone framing plus a cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide, including many recent iPhone models and Samsung phones.
- Rotates between portrait and landscape orientation and locks when turned 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.
Pros
- The 57–88 mm width range accommodates a variety of smartphones.
- Portrait-to-landscape rotation makes it easier to adapt framing to different recording formats.
Consider before buying
- The phone must fit within the 57–88 mm width range, so measure it with its case attached.
- The 500 g limit applies to the mounted setup, so account for the phone and any accessories together.
Read the full review summary
The 4382 combines a spring-style phone holder design with a cold shoe on top, threaded mounting at the base, and two rotary joints for adjusting position.
The clamp accepts phones 57–88 mm wide, and it can rotate between landscape and portrait framing with a lock at 90 degrees.
This layout suits mobile photography, live streaming, vlogging, and interviews when the phone needs to share a compact camera or tripod setup with a light or microphone.
The mount itself weighs 73 g and has a 500 g load capacity, so buyers should consider the combined phone and accessory weight when planning a rig.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone-width compatibility
The 57–88 mm range covers many phone sizes; check your device's width, especially if you use a bulky case.
Orientation flexibility
Landscape and portrait rotation plus two adjustable joints support a range of framing positions.
Mounting options
A bottom 1/4-inch-20 thread and cold shoe provide two ways to attach the holder to compatible support gear.
Accessory integration
The top cold shoe and threaded holes support a light, microphone, or compatible power bank holder.
Portability
At 73 g, the holder adds little weight to a camera or tripod kit.
Load planning
The 500 g capacity gives a clear limit, but the phone and mounted accessories need to fit within it together.
Key Features and Specifications of SMALLRIG Phone Mount
- Fits smartphones 57–88 mm wide, including many recent iPhone models and Samsung phones.
- Rotates between portrait and landscape orientation and locks when turned 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Top cold shoe accepts a compatible microphone or light; threaded holes support compatible power bank holders.
- The holder weighs 73 g and has a maximum load capacity of 500 g.
Pros and Cons of SMALLRIG Phone Mount
Pros
- The 57–88 mm width range accommodates a variety of smartphones.
- Portrait-to-landscape rotation makes it easier to adapt framing to different recording formats.
- The cold shoe and threaded holes create useful options for building a compact phone rig.
- Its 73 g weight is convenient for travel or a small camera bag.
Consider before buying
- The phone must fit within the 57–88 mm width range, so measure it with its case attached.
- The 500 g limit applies to the mounted setup, so account for the phone and any accessories together.
- The package includes the phone holder only; buyers building a full rig need compatible support and accessories separately.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider the 4382 if you want a clamp-based phone mount for a camera or tripod and expect to switch between portrait and landscape framing.
Its adjustable joints give you options for positioning the screen while keeping the setup compact.
It is also a good fit if you want to add a small microphone or light through the top cold shoe.
Before ordering, check your phone's width with its case and add the weight of the phone and planned accessories to confirm the rig stays within the 500 g capacity.
For travel creators, the 73 g holder can be a modest addition to a mobile filming kit.
Make sure your camera or tripod provides a compatible mounting point and that the accessories you intend to use match the mount interfaces.
Who should skip it
Skip this style if your phone falls outside the 57–88 mm width range or if you need a mount designed around magnetic attachment. Confirm the fit with your case in place before choosing.
Look elsewhere if your phone-and-accessory combination would exceed 500 g, or if you need a complete filming kit in one package; this product includes the holder alone.
How the SMALLRIG Phone Mount fits a compact filming kit
Clamp fit and phone changes
A width-based clamp can be useful when a creator rotates between phones or prefers not to rely on a magnetic interface.
The stated 57–88 mm range is the key fit check, and measuring with a case avoids surprises if the case adds width.
Framing for different formats
The holder can switch between landscape and portrait and lock at a 90-degree turn. That suits workflows that move between horizontal video and vertical social content, while the two rotary joints allow further positioning within their adjustment range.
Building around the phone
A bottom 1/4-inch-20 thread and cold shoe provide mounting choices for compatible camera or tripod setups.
The top cold shoe and additional threaded holes can help organize a light, microphone, or compatible power bank holder, though each addition contributes to the combined load.
Travel and load considerations
At 73 g, the mount is light enough to consider for a travel kit, but its 500 g maximum capacity should guide the complete configuration.
Weigh or estimate the phone and planned accessories together, and check that your support gear uses the required connection.
Alternatives to SMALLRIG Phone Mount
One distinct alternative is included because the supplied option offers a different attachment approach for a similar phone-mounting use.
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount 5156
Choose the 4382 if you prefer a clamp and want its stated compatibility to cover phones by width.
The 5156 may better suit an iPhone user who values MagSafe attachment and a detachable accessory plate; its description also cautions that external impacts may cause the device to detach.
- The 5156 is designed for iPhones with MagSafe functionality.
- It includes a detachable round plate that can serve as a mounting plate for accessories, has two rotating shafts, and lists a 500 g load capacity.
- The 4382 uses a width-adjustable clamp for phones between 57 and 88 mm and has two rotary joints, a top cold shoe, and threaded mounting points.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for creators who want a compact, adjustable clamp with portrait and landscape rotation and mounting points for a small accessory.
Its 73 g weight and 57–88 mm phone-width range make it a flexible building block for a lightweight phone rig.
Check the phone's cased width, support connection, and total rig weight before buying. The 500 g capacity and holder-only package matter most when you plan to add a microphone, light, or power bank holder.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible clamp-style mount for creators who want portrait and landscape phone framing plus a cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide, including many recent iPhone models and Samsung phones.
- Rotates between portrait and landscape orientation and locks when turned 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.